Blog /

Slide Typography: How to Size Titles, Body Text and Numbers So the Hierarchy Is Obvious

Published Nov 10, 2026

Hierarchy on a slide comes mainly from type: a large drop in size between levels, a drop in weight, and a small number of sizes used the same way on every slide. Aim for a headline roughly three times the size of the body, key numbers much larger than their labels, no more than three or four sizes on one slide, and a step between neighbouring levels big enough to see at a glance. Use two typefaces at most, pick the voice by the mood of the deck, and check that text and ground have enough contrast. Color should support the hierarchy, not carry it. Below are the rules with the reasoning, and a two-minute test for your own deck.

  1. 01

    Make the size drop obvious

    The eye reads size first. A headline at about three times the body size and a key figure far larger than its label gives the slide an obvious order. A 20-point line beside a 24-point line is not two levels; the reader sees one. A headline only a little larger than the body is one of the clearest signs of a template. If you are unsure, push the gap further than feels comfortable, then pull back a notch.

  2. 02

    Use a ladder, and use it everywhere

    Decide the sizes once for the whole deck: a size for big numbers, one for the main headline, one for sub-headings, one for body text and one for notes and sources. Each slide uses only the ones it needs, never more than three or four. When every slide steps down the same way, the deck feels designed, and the reader learns where to look. A rule of thumb for readability: nothing the audience must read should be much below 18 pt, and for a room, 24 pt body text is safer.

  3. 03

    Let weight do some of the work

    Weight is the second signal. Make headlines clearly heavier than body text, and keep the body regular or light. Do not bold whole paragraphs to create emphasis; emphasise one word or one figure. For a refined, quiet deck, a light, widely spaced face at large sizes reads premium; for an impact deck, a heavy face at large sizes does. Avoid medium weights that look like a mistake: weight changes should be obvious.

  4. 04

    Show numbers as numbers

    A key figure is the hero of its slide: set it very large, put its label small beneath it, and keep the label short. When several figures are equal in importance, make them all large and bold in the same neutral ink instead of coloring one. A coloured figure suggests it is the only one that matters. In Western business, avoid red for positive figures such as revenue and growth, because red reads as loss.

  5. 05

    Two typefaces at most, chosen for the mood

    Pick one display face for covers and big titles and one text face for everything else; they may be the same family. Then choose by mood. A heavy condensed or wide sans suits impact, launches and sport. A thin geometric sans with generous spacing suits precision, technology and calm data. A high-contrast serif suits heritage, luxury, fashion and editorial work. A classic serif suits consulting and finance. A rounded sans at medium weight suits warm, education, health and family brands. The strongest pairing is contrast: an expressive title above a quiet, light body, not two loud faces or two flat ones.

  6. 06

    Check contrast, spacing and line length

    Text needs enough contrast with its ground. A common accessibility guideline asks for at least 4.5 to 1 for normal text, which is a useful floor for slides. Keep body lines short enough to read in one sweep, give lines room to breathe and keep the same leading across the deck. Put small uppercase kickers and labels in wide letter-spacing, and keep ordinary text at normal spacing.

  7. 07

    A two-minute type test for your deck

    1) Squint: does the headline still dominate and the key figure still read? 2) Count the sizes on three slides: more than four means trim. 3) Compare two slides: do the same kinds of text use the same sizes? 4) Read the weights: is the headline clearly heavier than the body? 5) Check how many typefaces appear in the whole deck: two is plenty. 6) Check small text against its ground for contrast.

  8. 08

    Doing this at scale

    Setting a ladder by hand on thirty slides is repetitive. BetterPPT locks the typefaces, colors and ladder once for the deck, writes each slide's brief against it and returns real text boxes in the same typeface, size and weight, with the fonts included in the download. Your original wording stays or changes only as far as you allow. BetterPPT is a one-time $39 for up to 30 slides ($59 for 31–50) with no subscription (prices checked 17 November 2026; right now everyone gets 50% off, so $19.50 for up to 30 slides and $29.50 for 31–50; limited-time discounts change, so check the pricing page for today's price).

    How BetterPPT works, step by step →

Questions

How much bigger should a slide title be than the body text?

Aim for roughly three times the body size, and make key numbers much larger than their labels. The exact figures matter less than a clear, obvious step between levels.

How many font sizes should a slide have?

Three or four at most on one slide, taken from one ladder used across the deck: big numbers, headline, sub-heading, body and notes.

What is the minimum font size for slides?

A rule of thumb is nothing the audience must read below about 18 pt, with 24 pt body text safer for a room. Footnotes and sources can be smaller.

How many fonts should a presentation use?

Two typefaces at most: one display face for covers and big titles, one text face for everything else. They may be the same family.

Should I use color to show hierarchy?

Color supports hierarchy but should not carry it. Size and weight do most of the work; use color sparingly, for one accent or one class of equal items.

Can BetterPPT set this for my whole deck?

Yes. It locks one set of typefaces, colors and sizes for the deck and returns real text boxes in the same typeface, size and weight. $39 for up to 30 slides (prices checked 17 November 2026; right now everyone gets 50% off, so $19.50 for up to 30 slides and $29.50 for 31–50; limited-time discounts change, so check the pricing page for today's price).

Bottom line

If you want the type system set for every slide of a finished deck without doing it by hand, BetterPPT redesigns each slide and returns an editable .pptx. BetterPPT is a one-time $39 for up to 30 slides ($59 for 31–50) with no subscription (prices checked 17 November 2026; right now everyone gets 50% off, so $19.50 for up to 30 slides and $29.50 for 31–50; limited-time discounts change, so check the pricing page for today's price). In our same-deck test it gave the most professional result of the four tools, with a strict keep-every-word option when your wording is final; you can refine any slide afterwards by typing in the chat box, and the first slides take about 10 minutes (7–12 minutes in our recent jobs).

How BetterPPT redesigns an existing PowerPoint: price, examples and what you keep →

Ready for your AI PowerPoint redesign?